Steinen

Founded in 1907, Steinen machines and tests every oil burner nozzle in-house, from fine domestic sizes up to 28 gallons an hour.

Data sheetSteinen at a glance Parts we supplyFrom Micro-Flo to 28 USgph Send your RFQThe code on the nozzle is all we need

AuthorisedSteinendistributor Steinen oil burner nozzles, machined and flow-tested in-house.

Data sheet

Steinen at a glance

Item	Details
Manufacturer	Steinen GmbH, Ratingen, Germany — European arm of the Steinen group (Wm. Steinen Mfg. Co., USA, founded 1907)
Nozzle types	Solid cone (S, SS), hollow cone (H), partial hollow (PH), Micro-Flo and Twin Filter oil burner nozzles.
Fuels	Oil burners.
Key data	Standard range 0.60–28 USgph; Micro-Flo 0.20–0.35; Twin Filter 0.40–0.55 with 25-micron filter.
Applications	Nozzles for light-oil burners on heating and hot-water boilers
From Arne Nielsen A/S	Authorised Steinen representative and distributor, with the common sizes and angles on the shelf
To order	Send the nozzle code (capacity, spray angle, pattern) or the burner make and model.

From the stockroom

William Steinen founded his company in 1907, and it still makes all nozzle components on its own premises. Every Steinen nozzle is flow-tested for capacity, spray character and angle before it leaves the factory, and the Dyna-Coin process gives a finished seat between the metering valve and the body.

As an authorised Steinen distributor, Arne Nielsen A/S supplies Steinen oil burner nozzles and keeps the common solid, hollow and partial-hollow sizes on the shelf, from small domestic capacities up to the 28 USgph top of the standard range.

Send the nozzle code (capacity, spray angle and pattern) or the burner make and model. We match the right Steinen nozzle and ship to agents, ports, shipyards and vessels worldwide.

“Every nozzle tested before dispatch”

Authorised distributor — genuine Steinen nozzles, tested at the factory.
Full range — Solid, hollow and partial-hollow patterns to 28 USgph.
Stocked & ready — in Denmark and with our EU partners.
Worldwide — shipped to agents, ports, shipyards and vessels.

Parts we supply

Steinen nozzles

Solid cone SSolid spray pattern, 0.60–28 USgph.

Solid cone SSSolid pattern variant within the 0.60–28 USgph range.

Hollow cone HHollow spray pattern, 0.60–2.25 USgph.

Partial hollow PHPartial hollow pattern, 0.60–10.0 USgph.

Micro-Flo0.20–0.35 USgph, with fine twin filters for low-output burners.

Twin Filter0.40–0.55 USgph, anti-clog design with 25-micron inner filter.

Large capacitiesStandard nozzles up to 28 USgph for bigger burners.

Cross referenceSteinen codes matched against other nozzle makes.

Nozzle accessoriesAccessories for oil burner nozzles from the Steinen range.

✂

PDF

Steinen RFQ

Send the nozzle code stamped on the Steinen nozzle (type, capacity and spray angle), or the burner make and model. We reply with a matched quote within one working day.

← Back

Thank you for your response. ✨

Thank you — your RFQ has reached Arne Nielsen A/S. We reply by email with a matched quote.

PDF, JPG or PNG · Please include part numbers or IMPA codes, the delivery port/address and IMO/vessel no. when availablePrefer email? Send it to info@arnenielsen.com

Works with