Balancing valves make sure the water in heating and cooling systems is distributed correctly, so every circuit gets exactly the flow it needs. Oventrop has explained how to choose between the two most common body materials, bronze and cast iron. The message is clear: price should never be the only deciding factor.
Bronze: compact and corrosion-resistant
Bronze is known for its good corrosion resistance. Bronze valves are compact and suit short pipe runs and smaller dimensions. They are typically used in cooling water systems, heating and cooling circuits and – where approved – in domestic water installations.
Cast iron: economical in large sizes
Cast iron is the economical choice when dimensions get large, and it is available in a wide range of sizes. Ordinary grey cast iron is, however, relatively brittle. Where higher strength and toughness are required, ductile iron is used instead.
At sea, stricter requirements apply
On board ships, stricter requirements apply to materials, approvals and resistance to seawater and vibration. Read more in our article on the marine pages: Oventrop balancing valves in bronze or cast iron at sea.
Don’t choose on price alone
The right valve depends on several factors:
- The medium – water, glycol mixture, cooling water or domestic water
- Pressure and temperature – the system’s operating and maximum values
- Corrosion resistance – how aggressive is the environment?
- Pipe size and connection – threaded or flanged, and which DN
- Balancing – how precisely must the flow be set and measured?
Oventrop at Arne Nielsen A/S
Arne Nielsen A/S distributes Oventrop. Read also Every degree counts – Oventrop thermostats.
In Denmark, installers can order on their normal account with Ahlsell, Brødrene Dahl, AO, Lemvigh-Müller, Boldsen or Hatten – in Norway and Sweden with Ahlsell or Brødrene Dahl. Write to info@arnenielsen.dk with size (DN), material and pressure class, and we will find the right Oventrop valve.
Source and graphics: Oventrop.
